![]() |
Welcome Guest ( Log In | Register ) The Gallery Links Link Exchange Boat ramps
![]() ![]() |
![]() |
![]()
Post
#41
|
|
![]() His Eminance ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Administrators Posts: 5,725 Joined: 13-April 07 From: Sydney Member No.: 2 ![]() |
How do you do a very fine third coat? Put Less Resin On ![]() ![]() The 1st coat is a bit heavy main reason it needs to soak into the cotton Next coat alot thinner & it's moreso to fill any sink backs which have occured after the 1st coat With every coat whether it's 1 , 2 or 3 not a good idea to just apply & 4get I go back every say 20 minutes to check on it, you can stuff the job by leaving air bubbles in the resin So I brush through again & again if need be + by doing this you also get rid of any area's where to much resin has been applied. Not often but if I 4get or doing something else & the resin starts gettting tacky ?? I use a bit of Metho on the brush to make it glide along easier the metho dry's & dosen't effect the resin . -------------------- ![]() Save The Fish, Eat a Pussy |
|
|
![]()
Post
#42
|
|
![]() the yack man ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Donator Posts: 2,165 Joined: 13-April 07 From: paradise beach Member No.: 4 ![]() |
Buggered if I know what brand the winch is ![]() Not a Fuji but it's one of the better quality Chi Nee ones & let me tell you some of those Chi Nee/Taiwon ones are pathetic Yes I generally do 2 coats on the light sticks sometimes a very fine 3rd coat thanks mate, didn't think it was a fuji, but then again it dose not look like a cheap crap either ![]() ![]() ![]() -------------------- bugger it's sold,got meself a house instead
![]() |
|
|
![]()
Post
#43
|
|
![]() Kokino Vraka ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 1,001 Joined: 24-July 07 From: Earth Member No.: 220 ![]() |
Thank you for that information Jumpy.
|
|
|
![]()
Post
#44
|
|
![]() His Eminance ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Administrators Posts: 5,725 Joined: 13-April 07 From: Sydney Member No.: 2 ![]() |
No probs Christos !
Like I said earlier you can apply resin on a bit thick , let it sink in & settle into the cotton , then use your brush to thin it out. After each swipe of the brush just sqeeze out the excess out b4 brushing again -------------------- ![]() Save The Fish, Eat a Pussy |
|
|
![]() ![]() |
Lo-Fi Version | Time is now: 22nd August 2024 - 03:15 PM |