Engine Support, Pics for Ang! Options

[Spudly]

Mate has had one of these made for his boat, works brillently and takes load off the hydralics for travelling, was hoping somone on here was ok with aluminum and could knock a few up?

Attached File(s)

 FB_IMG_1437304692131_resized.jpg ( 88.44K ) Number of downloads: 19
 FB_IMG_1437304695655_resized.jpg ( 87.41K ) Number of downloads: 14
 FB_IMG_1437304700378_resized.jpg ( 90.92K ) Number of downloads: 18
 FB_IMG_1437304703700_resized.jpg ( 127.73K ) Number of downloads: 17
 FB_IMG_1437304706751_resized.jpg ( 130.78K ) Number of downloads: 12
 FB_IMG_1437304709717_resized.jpg ( 114.75K ) Number of downloads: 22

 

[Spudly]

Guessing game as to what sort of boat it is!!

[Jumpus GooDarus]

Thought ewe said it sliped over ram
Think i've cum up with a simpler better option only because i'm a genius

[SUMOFISHIN]

I think it would bounce around a bit while you are driving the boat

[nimrod]

I think it would bounce around a bit while you are driving the boat

George it would be in the back of the car when you are driving the boat, used for when boat is on
trailer for transport.
Very simple to make and other designs about.

[Fed]

Doesn't the motor have its own little locking lever things Spud? (Can I use your toilet?)

Boat looks like the ones they charge you for an extra Metre of pointy nose.

I'm with Sumo.

[Spudly]

Nice work FED

[Spudly]

Doesn't the motor have its own little locking lever things Spud? (Can I use your toilet?)

Means you dont have to trim motor completly up to travel in the case that your engine hits back of boat or bait board when you resize engines.

also the little flick latches are only meant for storage I beleive, not for the weight of motor bouncing around.

[Jumpus GooDarus]

Nice work FED

So it's wun of those mexican BumCrushers huh

[Fed]

Means you dont have to trim motor completly up to travel in the case that your engine hits back of boat or bait board when you resize engines. tongue.gif

The motor should be all the way up to balance its weight directly above the transom.

also the little flick latches are only meant for storage I beleive, not for the weight of motor bouncing around.

Depends on the motor, some lesser motors can't handle it and advise using additional support.
(Yamahaha for one)

It's all been done to death Spud (Can I use your toilet?), let's face it people are going to do whatever they want anyway and it probably doesn't matter too much.

[Jumpus GooDarus]

It's all been done to death Spud (Can I use your toilet?), let's face it people are going to do whatever they want anyway and it probably doesn't matter too much.

So has peeps trying to tell me how to set up trailers merely by looking @ a pic

But they still try

[Fed]

I'm sure you'll get it in the end Jumpy.

[nimrod]

So has peeps trying to tell me how to set up trailers merely by looking @ a pic

But they still try

Sorry for caring.

[Jumpus GooDarus]

Frank i was having a dig @ fed
I'm convinced he deliberatly puts up posts like he did to piss me off must give him a stiffy.

I spent an hour with boys @ sales trailers prior to putting up that post, went through the senario of where to relocate suspention then i had to read what fed posted

5 new rims/tires ,new hubs/bearing etc + heavy duty jockey & sum ting else set me back $1000

4got wire cable & had to go into camec [formerly caravan accessories] they have the same rim/tire $255 each for the gooses out there that's $1,275 witout the udder stuff

Got to be carefull where wun shops these days else wun wont have any $$'s left & wun will have to download an app & use wuns mobile phone to observed if a HillBilly soccer mum is having a crap on wuns front lawn