![]() |
Welcome Guest ( Log In | Register ) The Gallery Links Link Exchange Boat ramps
![]() ![]() |
![]() |
![]()
Post
#1
|
|
![]() " Master of Black Fish"(alias The Criminal)" ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Moderator Posts: 1,422 Joined: 7-May 07 From: Engadine NSW Member No.: 30 ![]() |
I haven't used my Penn Senator for a few years, and despite washing in warm soapy water after use, it has still got corrosion on it. Also the rod winch.
I am going to lightly rub it over with soapy steel wool. Is there a product or any hints on how to prevent the corrosion from coming back too quickly? I am talking about the white salt, powdery bloom. |
|
|
![]()
Post
#2
|
|
![]() the yack man ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Donator Posts: 2,165 Joined: 13-April 07 From: paradise beach Member No.: 4 ![]() |
yep a light spray with inox or w.d.40 should slow it down
![]() ![]() ![]() -------------------- bugger it's sold,got meself a house instead
![]() |
|
|
![]()
Post
#3
|
|
![]() the wizz kid ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 693 Joined: 14-April 07 From: manilla,kingstown Member No.: 9 ![]() |
mate i allways spray the whole reel with a pressure pack clear acrylic laquer before spooling them up and they stay good ,you could even clean them up and spray the same way
-------------------- allways in the shit ,its just the depth that varies
|
|
|
![]()
Post
#4
|
|
![]() Jewfish ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 141 Joined: 12-March 08 From: Sutherland shire Member No.: 2,564 ![]() |
try silicone spray and then wipe the excess off.
I would not use steel wool too harsh i use a scourer and soapy water the spray with silicone spray and seems to work for me. -------------------- A Pirate by name, A Pirate by nature! I support FILLET and RELEASE! Botany Bay PB's; nil to date Port Hacking PB's; Flathead 47cm, Bream 36cm, Flounder 32cm (these are not big PB's but its a start) Northern Australia PB's; Shark 1.6m(whaler), Spangled Emperor 60cm, Spanish Mackerel 1.45m |
|
|
![]()
Post
#5
|
|
![]() His Eminance ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Administrators Posts: 5,725 Joined: 13-April 07 From: Sydney Member No.: 2 ![]() |
It's because the components you mentioned are chrome plated brass & there's not much you can do to stop the corrosion.
best you can do is clean it up using a fine steel wool. I tend to use Lanogaurd 3000 to spray my reels Any solution with lanolin will last sprays such as CRC & Wd-40 are a big waste of time & effort as the solution evaporates -------------------- ![]() Save The Fish, Eat a Pussy |
|
|
![]()
Post
#6
|
|
![]() *Tooth Fairy* ![]() ![]() ![]() ![]() ![]() ![]() Group: Donator Posts: 203 Joined: 15-February 08 From: The Shire Member No.: 2,553 ![]() |
They claim INOX does not dry out. Does INOX contain any lanolin?
If not is the Lanox a better choise? -------------------- Don't tell anybody but my name is Fushin Freddie
![]() I don't exaggerate...I just remember BIG! |
|
|
![]()
Post
#7
|
|
![]() Jewfish ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 141 Joined: 12-March 08 From: Sutherland shire Member No.: 2,564 ![]() |
They claim INOX does not dry out. Does INOX contain any lanolin? If not is the Lanox a better choise? Because it has lanolin......and the sheep will remember you and the kiwi's will love you! ![]() -------------------- A Pirate by name, A Pirate by nature! I support FILLET and RELEASE! Botany Bay PB's; nil to date Port Hacking PB's; Flathead 47cm, Bream 36cm, Flounder 32cm (these are not big PB's but its a start) Northern Australia PB's; Shark 1.6m(whaler), Spangled Emperor 60cm, Spanish Mackerel 1.45m |
|
|
![]()
Post
#8
|
|
![]() Shark ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 207 Joined: 15-October 07 From: S.A Member No.: 720 ![]() |
I use inox for all my corrosion protection including spraying my lures after swims doesnt mess with pain,line,braid or rubber so its good for me...Also its food grade safe.
-------------------- YOU MUST SHOW RESPECT TO GET IT IN RETURN, NEVER PRESUME YOU DESERVE IT.....
. . ![]() ![]() ![]() ![]() ![]() |
|
|
![]()
Post
#9
|
|
![]() *Tooth Fairy* ![]() ![]() ![]() ![]() ![]() ![]() Group: Donator Posts: 203 Joined: 15-February 08 From: The Shire Member No.: 2,553 ![]() |
Well if INOX has lanolin in it I will grab some tomorrow at Withworths.
Website claims to sell 300g can of INOX on special for $6.95 Lanox is $9.95 Thanks. -------------------- Don't tell anybody but my name is Fushin Freddie
![]() I don't exaggerate...I just remember BIG! |
|
|
![]()
Post
#10
|
|
![]() *Telescopic Stick* ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 234 Joined: 14-April 07 From: THE SHIRE Member No.: 8 ![]() |
buy some new ones viva has good bargins ..(( who da tight arse now))) hehehheeh
|
|
|
![]()
Post
#11
|
|
![]() *Tooth Fairy* ![]() ![]() ![]() ![]() ![]() ![]() Group: Donator Posts: 203 Joined: 15-February 08 From: The Shire Member No.: 2,553 ![]() |
buy some new ones viva has good bargins ..(( who da tight arse now))) hehehheeh Catch, only just bought some new Viva and Browing reels. Only ever washed any of my reels in water and they all have lasted for years. Only buying the INOX to say ME TOO -------------------- Don't tell anybody but my name is Fushin Freddie
![]() I don't exaggerate...I just remember BIG! |
|
|
![]()
Post
#12
|
|
![]() " Master of Black Fish"(alias The Criminal)" ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Moderator Posts: 1,422 Joined: 7-May 07 From: Engadine NSW Member No.: 30 ![]() |
I didn't see you today. All the other hobbits were there. I splurged and bought the Lanox - you cheapskate
![]() Cleaned the reel and lubed it. Pretty good stuff, really. Will do the reel seat on the rod tomorrow and respool the reel with mono (maybe). I was surprised to find (I had forgotten) that I had backed it with dacron, then a hundred or so metres of 30lb mono and 250m of 30lb Raptor braid. |
|
|
![]()
Post
#13
|
|
![]() *Tooth Fairy* ![]() ![]() ![]() ![]() ![]() ![]() Group: Donator Posts: 203 Joined: 15-February 08 From: The Shire Member No.: 2,553 ![]() |
KK,
Why Lanox over Inox??? PS I saw some seafood extender floating down the river today. I though you said you left it on Dave's bonnet? Did you keep some to fish with and don't tell me it was berley? I cannot stand the crap I bet fish would not touch it as well. ![]() Only tossing, but there is heaps of rubbish in the river ATM due to the bloody rain. -------------------- Don't tell anybody but my name is Fushin Freddie
![]() I don't exaggerate...I just remember BIG! |
|
|
![]()
Post
#14
|
|
![]() Twoeyesea ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 825 Joined: 21-December 07 From: Gods Country Member No.: 1,659 ![]() |
Cleaned the reel and lubed it. Pretty good stuff, really. Will do the reel seat on the rod tomorrow and respool the reel with mono (maybe). Once you have tidied that up kkw, you can hand it over to the son-in-law. He would appreciate that. ![]() Then while you in the giving mood, hand over the old tinny to him. He'll think it's x-mas ![]() ![]() -------------------- Don't hate me, cause you ain't me... :)
|
|
|
![]()
Post
#15
|
|
![]() " Master of Black Fish"(alias The Criminal)" ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Moderator Posts: 1,422 Joined: 7-May 07 From: Engadine NSW Member No.: 30 ![]() |
I read the labels on both, Greg, and the Lanox seemed to be more suitable. The Inox was like WD40. A penetrating, water dispersant oil. I only had a quick read though, and figured that if Lanolin keeps them sheep lubricated for the Kiwi 'wool' trade, then it should be good for the reels as well.
The son in law saw the Penn and asked what the star thing was for!!!! I think I will get him one of those pink outfits from K Mart - the ones with the plastic reels. This post has been edited by kkw: Apr 19 2008, 03:08 PM |
|
|
![]()
Post
#16
|
|
![]() Shark ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 207 Joined: 15-October 07 From: S.A Member No.: 720 ![]() |
inox is food grade safe nothing like wd-40 plus it will not build up residue like lanolin when applied on a consistant basis...
Inox can be sprayed into your mouth as its non toxic try that with wd-40 [lol] LANOX Lanolin is a natural wax found in animal wool especially the wool from sheep, commonly referred as 'WOOL FAT' or 'WOOL GREASE', it has wide spread uses, cosmetics, medical, soaps, etc. Down through the centuries the Egyptians, Romans, Vikings, sailors and soldiers alike all used lanolin as a very effective anti- corrosion and waterproofing agent for a variety of metals, materials, timbers, to protect sails, leather, cannons, etc. Although we make INOX, a quality anti-corrosion lubricant, there are areas where a lanolin based anit-corrosion lubricant like LANOX is sometimes better suited for the application at hand. LANOX is a heavy duty anti-moisture, anti-corrosion lubricant made with a high grade lubricating oil and lanolin base with specialized chemical compounds. LANOX contains no silicon, kerosine. acids or dieselene. LANOX is harmless to metal points & surfaces, plastics, painted & enamel finishes, fibreglass, formica, rubber or neoprene seals. LANOX doesn't become sticky, gooey or gum up. LANOX is non-conductive, non-static & non-corrosive. LANOX has neutral properties, low flammability (NON-AEROSOL) LANOX DOESN'T DRY OUT OR WASH OFF WITH WATER TECHNICAL DATA ASTM D4052 DENSITY @ 15.6 °C .8461 DIELECTRIC 26 ASTM D93 FLASH POINT 179 °C ASTM D97 POUR POINT -26 °C ASTM D445 VISCOSITY ( cSt, 40 °C ) 13 ( cSt, 100 °C ) 2.4 SOLUBILITY IN WATER NEGLIGIBLE INOX DISPLACES - PENETRATES LUBRICATES - PROTECTS INOX contains no silicon, acid, kerosene or dieselene. INOX will not harm metal points or surfaces, plastics, paints, enamels, fibreglass, formica or neoprene seals. INOX doesn't dry out, gum up, become gooey or sticky or wash off with water ! INOX is non- conductive, non-static, non-toxic, non-corrosive and non-staining. APPROVALS FOOD GRADE AUSTRALIA: Instrument of Approval is freely available on request. NEW ZEALAND: NZFSA Approved C 12 (All animal product except dairy) N.B. Copies of Food Grade Approvals can be downloaded from the INOX-mx3 MSDS page. They can also be faxed or posted directly to the recipiant from Candan Industries Pty Ltd. N. A. T. O. Defence Manufacturers Code No. Z5594/5 ( R. A. N. App.) TECHNICAL ASTM 1298 DENSITY @15.6 ° C .850 ASTM D97 POUR POINT -13 ° C ASTM D92 FIRE POINT 204° C DIELECTRIC > 40 ASTM D1744 KARL FISHER WATER 273.2 ppm ASTM D445 VISCOSITY @ 40° C 10.04 @ 100 °C 2.54 -------------------- YOU MUST SHOW RESPECT TO GET IT IN RETURN, NEVER PRESUME YOU DESERVE IT.....
. . ![]() ![]() ![]() ![]() ![]() |
|
|
![]() ![]() |
Lo-Fi Version | Time is now: 2nd September 2024 - 03:43 AM |