Rod Bashing. Options

[Christos]

Looking at the photo gives a better understanding of the rod holder. I did have this in mind on the last post.

Now that another person has mention it by cutting off a piece and welding. I have another a similar idea.

Why not attach sometime that can slide back and forth so that you do not cut off the rod holder and have to re-weld?

I am not a very good drawer and so I can not give you a drawing so I will describe. Flat piece of wood with two groves to support the bar. Another piece of wood cut into a semi circle above the bar. Drill two holes to attach one piece of wood to another with bolts and washer and wing nuts.

[Phil]

I thought id just hide this down here. Still a few about,but much the same as last week. Stick to the mango

[kkw]

I was tossing up whether to buy a cheap telscopic rod off ebay, and cut a 6" piece out of it for the butt extention. We have a council street cleanup next week, and as I was driving along today, my wife said, "there's a fishing rod in that pile". I drove to the shops and stopped on the way back home to have a look. It was a brand new, unused telescopic rod with the tag still on it. Took it home and sawed off what I needed. GREAT . Now just have to get some cork, glue it and shape it. Presto, all done.

[kkw]

O.K. all done. (almost all done. Just have to paint on some finishing epoxy on the glass bits)

Cut a little bit of cork off the original butt. Didn't need to, in hindsight.

This is a piece off an old rod. Council cleanups can be a source of materials if you look around.

This insert is glued into the rod and the extension piece with epoxy glue.

The masking tape is used to build up the insert for a nice fit.

Just have to paint a bit of epoxy onto the glass, glue the butt cap on and then put some heatshrink over the cork. Voilla!!

Thanks for the advice and help JG.

This post has been edited by kkw: Aug 14 2008, 10:48 PM

[poly]

kk if u don't mind my idea's, i would suggest an over bind on the join before you epoxy the finished rod

[Jumpus GooDarus]

Kay Kay Winks where did you have that extention prior to gueing it onto the rod ?????


Cause it looks kinda Brown

[kkw]

I got if off you didn't I? One second I was talking to you and the next you produced it from behind you somewhere. I assumed you had it in your pocket. Was I wrong??!!!

[Jumpus GooDarus]

It was clean when I had it

Oh yeah !

You are bloody hopless & dont listen.

Why the hell didn't you trim back where the old bu8tt cap sat on the rod ??????????

Now you have a bloody ugly visible join.

Think you best stick to washing dish's leave rod building to those who have some idea

[Phil]

You have been told

[kkw]

Oh right - pick on the Crim. The Crim is only good at housewifing. The Crim will take a pic of the finished product for all to comment on. Tomorrow (maybe). The Crim is GOOD.

[kkw]

In the words of my good mate Poly - it is dune - dee you enn ee - dune or is that dun, or done? Anyway, it is finished and looking o.k.

Attached File(s)

 DSC_0236.jpg ( 293.81K ) Number of downloads: 18
 DSC_0234.jpg ( 173.94K ) Number of downloads: 21

 

[poly]

looking good mate, nice job

[Christos]

Well done KWW looks like a JG rod.

[Jumpus GooDarus]

Honestly kk I cant believe how silly you are & you remind me alot of my old man

Why on earth did you lacquer over the cork for ???

Only a Brurry Irriot would do such a thing

Not going to go into why not to you go figure it out since you concocted that brain explosion, from your original pics thought the rod still had plastic on the foregrip but now know you lacquered it as well.

Like I said you remind me of all the $$#@%$127 things my old man would do must be your generation I guess

Christos looks nothing like a JG rod

[kkw]

Vot you talkingk!!!. No laquer you old fool. The foregrip has plastic on it - as purchased. The extension cork has ....... plastic on it, same as the foregrip. Put your magnifying glasses on and have a look at the plastic on the butt cap, where I trimmed it.

Fair dinkum!!! You remind me of all the middle aged whipper snappers of your generation. Plastic, plastic, plastic. Look again.

[Bees Knees]

I'm with Christos.. It's a dead ringer for a JG custom

But Klaus, how do you find the time between washing, cooking, dishes ect

[Jumpus GooDarus]

Beg your pardon kk ???

Go back to the sequence of shots that you posted the 2nd one in particular

The one that you said you found in a council cleanup but it was the piece that I machined up for you & it never had plastic on it when I gave it to you did it ????????

I said that originally I thought your rod still had plastic on it but after reading poly's comment where he told you to epoxy it

Well thats what I assumed you had done I looked @ the 2nd pic not the 1st.

Either way that extention never had plastic on it & for the life of me I cant understand why on earth you proceeded to coat it with plasic.

Only thing I can think of is that you're trading your tinny in for a polycraft

[kkw]

Beg your pardon kk ???

Go back to the sequence of shots that you posted the 2nd one in particular

The one that you said you found in a council cleanup but it was the piece that I machined up for you & it never had plastic on it when I gave it to you did it ????????
It says, 'This is a piece of an old rod. Then we have a full stop and a new sentence, letting scavengers know that a council cleanup is a good place to find such things.' The piece in the photo was what you kindly machined up for me. Thats why I said a big thank you at the end of that post.

I said that originally I thought your rod still had plastic on it but after reading poly's comment where he told you to epoxy it

Well thats what I assumed you had done I looked @ the 2nd pic not the 1st.

Either way that extention never had plastic on it & for the life of me I cant understand why on earth you proceeded to coat it with plasic.
I put plastic on it, to protect it. For no other reason. Same as the foregrip.

Only thing I can think of is that you're trading your tinny in for a polycraft
I took my small tinny to a Polycraft dealer to get a trade in offer. He offered me four Polys for it. Not enough, I said.

[kkw]

Took this nice rod out for a spin today. Casts the little Rebel popper a long way and as for plastics .... it is great. Only one thing bugged me today. as I was rigging the rod, I noticed some ceramic missing from the stripper guide. I bypassed it, but had to by a new Fuji on the way home. Now I don't have any black binding thread
Didn't get a hit on the poppers, but hooked a small whiting on a little black and gold shad. Got to get out in the boat I think. Got three spots lined up in the Port, where I have caught very big whiting on nippers. Wonder if they will like lures.

[Jumpus GooDarus]

have any black binding thread

Well get sum white thread & paint it Black