![]() |
Welcome Guest ( Log In | Register ) The Gallery Links Link Exchange Boat ramps
![]() |
![]()
Post
#1
|
|
![]() *FruitLoop* 53 ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Donator Posts: 2,043 Joined: 13-April 07 From: Out in the sticks Member No.: 3 ![]() |
Dunno what prices are in AUS, but just ordered some 750yd Spools of ANDE Pink fishing mono from the states for around $12 each + delivery. Picked up a few other things like carbontex drag washers for my ABU's to fix the sticky drags..
Figure if i sepnd a bit of money on some fishing gear I might start fishing again.. Spending it all on Firearms latley.. |
|
|
![]() |
![]()
Post
#2
|
|
![]() *Mr Shiny Head* ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 2,221 Joined: 14-April 07 Member No.: 7 ![]() |
Fishing???
I thought you lived in the desert? -------------------- ![]() SEAFARER: Fine as a Fairy's Fart |
|
|
![]()
Post
#3
|
|
![]() His Eminance ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Administrators Posts: 5,725 Joined: 13-April 07 From: Sydney Member No.: 2 ![]() |
Picked up a few other things like carbontex drag washers for my ABU's to fix the sticky drags.. Have to have the correct carbontex for each drag system, there's different grades & not all are suited to reel in Q The original & best ABU's had leather washers & they only got sticky when leather got dry Easy fix just pull them apart & re-grease the washers Moly grease is the best & it can also be used on cabontex, it's prime purpose is to stop drag stick -------------------- ![]() Save The Fish, Eat a Pussy |
|
|
![]()
Post
#4
|
|
![]() *FruitLoop* 53 ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Donator Posts: 2,043 Joined: 13-April 07 From: Out in the sticks Member No.: 3 ![]() |
Have to have the correct carbontex for each drag system, there's different grades & not all are suited to reel in Q The original & best ABU's had leather washers & they only got sticky when leather got dry Easy fix just pull them apart & re-grease the washers Moly grease is the best & it can also be used on cabontex, it's prime purpose is to stop drag stick Got the right ones buddy, The 4000-6000 all use the same drag washers now.. They are pretty shit, i tried pulling them out and polishing them on a very fine diamond stone and then re greasing but just as shitty so ill go with som carbon ones and a small amount of molly grease? or graphite powder??? What about lube used for resizing brass?? |
|
|
![]() ![]() |
Lo-Fi Version | Time is now: 19th August 2024 - 05:11 PM |