How about some pics and info on the new project JG!
Lets get some chatter going on here!
Did Hydro Boy get through the login process??
All the talking machines oz imported are broken
How we supposed to get chatter ???????
what is broken
Those cheap Talking Machines ewe imported from ChiNee
Bunch of Mutes if ewe ask me
Getting dare console just needs roof welded on
Cut away sum of origmidij casting dick
Not me frank I'm prob an average welder the dual pulse mig machine i purchased when i built pop can make anyone look good
My prob these days is the eyes aren't as sharp as they wunce were & hands not as steady either when i'm tiging
What i haven't lost is ability to think sheet metal developement i see the job finished b4 i start
Biggest prob peep have when using tig on alloy is position of tungston
Unlike when welding s/s & tunston pretrudes out past shrout with alloy have it just inside
You dont want tungston ever touching metal rely on the HF
Sort of got back into it today with no Spud Muffin dropping land mines on my lawn i got a wee bit done
I truly still dont believe the smamosal whoever put this goat together created.
Very time consuming tracing all the plumbing i ended up welding it all shut & doing my own new system
Original plumbing was pathetic & quite easily the cause as to why goat went down.
Went shopping yesterday got all the electronics & a auto pilot kit
What a waste of a week bloody lawyers they should be zot
Bit of luck i may have today to play with goat have got to this stage
More photos, more photos, more photos, did you hear me I said MORE photos.
It'll be a while frank
Had a shocker today only just got out of bed
Thank god for morphine pills
ps] I did a bulk buy when BIAS went into liquidation have stuff like switch panels, trailer leaf springs, hatches, compartment lockers just to name a few .
I'll take a few pics & post them in case anybody needs stuff like this
Managed to get a wee bit done 2day the day after yesterday
Console finally finished doors etc all fitted & removed
It's ready to get prep'd for paint
Nearly there everything is built & fitted up tis easy doing all the electricals with consol out of the goat
Was not happy with hight boat sat on trailer it would've meant i'd have to have ute in water to launch/retrieve got arsed about by idiot @ tire place when i ordered new rims/tires in the end told him to stick them up his arse i gained SFA not how he explained to me prior to ordering.
Longer draw arm was anutta option but i ended up sliding goat further back on trailer got thicker skids to compensate clearance prob have to sneak out this morn get alloy to remodify winch post etc
What size alloy do you need, ? chances are there may be some here you could have.
Went out & got them this morn frank
Went with 9 inch they lowered the rig 80 mm
With the boat sitting that far back on the trailer all the weight of the boat is going to be riding on the two rear tyres and
the trailer will pitch and sway even at low speeds.
Why not do away with the springs and get a couple of rubber inserted axles to lower the boat ?.
OH and your trailer lights will be too far forward from back of engine to lights
way to far over the back of the trailer! you need to keep the correct towball weight and that would put it way out, im sure you are pulling our legs!
God ewes are wallys
Only moved it back 450 mm & will be moving suspention back 450mm to compensate.
Is there anything else i can help ewes with ????????
God ewe are a wally
Moving the suspension back 450mm will over compensate, you're forgetting the weight of the trailer frame.
Is there anything else i can help ewe with ????????
The goose has arrived
Tell me goose did ewe factor in that it's a dual boggy into your equation
Amazing how everyone is an expert but all ewes do is sit behind a computor pretending to be picking on the stupidest things
You're done googleboy, off you go.
Noice. You must almost be out of green paint by now?
Excellent Job again Jumpy! Could test it under the Manilla Bridge
If I ever see that boat I'll rip the 2 off.
kk likes green
It reminds him of live weed
Got the donkey 2day it's nice & shinny like Fed's head
What motor did you finish up getting mate?
A big shinny wun
Was gunna take it out for a run 2day but ran out of time
Ended up stoping off @ my local supermarket to accessorise the goat
[attachment=2463:cc.jpg]
nice work
we need more plastic on this site.
how about a nice plastic rap to keep the wind from carrying in all sea spray.
nice build Jumpus
Paul
Ducks go Quack
Geese go Honk
Potato's go PaTaTa
Parrot's like plastic
Squirrels go NUTS 4 nimrods
Crims do sneaky sneaky's
Wot do wombats do ??????
Took goat out for a run yesterday threw a few egi's in & ended up braining the squids
Goat screams only rev'd her out to 4000rpm & was pulling 24 knots was weird driving this thing not used to steering from so far aft & when looking 4ward it seemed like you were driving a 25 footer
Only hiccup was water did get into the hull, i'll have a look @ where wunce this rain stops
Overall the name says it all 2goodfa
Oh yeah &
Manilla Gorilla's go Ooo Ooo
Ozzymans go oi oi oi
Maybe you should put it out in the rain and see where the water runs out
Well, that is a very nice boat. Well done as always.
Snoring Snoring that's all i can hear.
WAKE UP U LOT
Ducked into motor boat club udder day pulled up up along side a mates goat hu was doing sum reno's took a pic whilst i was up on the bridge
Front deck looks like it is decked with cork.
It's actually 4 mm rubber whole goat was done in it ner use carpet again so easy to keep goats clean with this stuff
Not often i get to see my goats on the water Patata was up annoying me again put a few pics he'd taken on my computer
The JG after re-power & a few mods different goat with new horsepower
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)